KRK Rokit 6

Studio monitors can be one of the most important pieces of gear in the recording studio. Your speakers are what you will reference everything you hear too, and make judgments on your mix based on what you hear. If you are using monitors that do not represent a flat Eq then you are hearing the sound altered by the speaker and not what it actually sounds like. 

I have had the opportunity to test and experiment with several different studio monitors including the KRK Rokit 6's. At a first listen they sound nice and full with a good presence at the low end. Listening to hip-hop and R&B they sounded great. When I switched to rock and more classical music, the KRK’s seemed to be coloring a large amount of the song. I soon discovered that the Rokits come built in with a frequency curve that is pre determined by the company. This may be good when trying to enjoy some music and just playing it back in your living room, but when mixing in a studio it is far from ideal.

I continued to listen to different genres to see how they would sound out of the KRK’s. It seemed pretty consistent that these speakers favored bass heavy songs. We then played the same songs out of some Yamaha HS80M studio monitors to compare, the difference was night and day. The Rokits lacked the high presence that is required from studio monitors and boosted to much lows which is a unnecessary when properly trying to mix music.

Overall I would say that these are great party speaker. If you are trying to listen to loud music on the couch these are the speakers for you. If you are in the studio trying to accurately mix your music, I would recommend staying away from the KRK’s and find something that represents the sound more accurately.

Universal Audio 710 Twin-Finity

When capturing sound there are three main components in your signal chain. Your microphone, the pre amp to boost the microphone signal, and your recording device, weather it be a computer or a tape machine. Each part of the chain plays a vital role in how the real sound will translate into a captured medium. The pre amp is arguably the most important part of your signal when it comes to capturing clean precise sound. A quality microphone is preferred, but you can get a way with a lower end microphone and very high-end pre amp and still get quality sound.

The Universal Audio 710 Twin-Finity is one of the best sounding pre amps I have had the pleasure to work with. It features both a solid state and tube amplifier that can be blended together for optimal sound. Like most pre amps it offers 48v phantom power, a pad, and a low cut filter. What separates it from the crowed is the warm and rich sound you can achieve when properly blending the solid state and the tube amplifiers together. 

I had the privilege of recording through a Neumann TLM 49 and converted my audio through RME ADI 8, probably one of the best sound chains you could possibly but together, but nether less adding the universal audio to the chain made a world of a difference. Instantly while recording the same artist, the vocals sounded big, bright and were filled with presence. It returned the traditional analog sound to a digital recording. When recording acoustic guitar it made the highs crisper and the mids and lows have more warmth and presence. Overall it’s not for every recording application, but when used for vocals or acoustic instruments the 710 Twin-Finity is in a league of its own.

I would recommend this pre amp for anyone looking to create professional recordings on a budget. It may have a larger price tag at medium of $800, but for the money spent there are very few pieces of equipment that can dramatically improve the overall timbre of your recordings. 

Business Plan Tips 2

Taking in consideration what Mr. Powers and Mr. Nathanson mentioned about business plans, it is important to revise your business plan to make sure it is fully satisfactory to your liking. After reading and watching videos from Mr. Nathanson I realized how important it is to have a good team surrounding you, and to be able to have full communication with your partners and workers. 

I have been known to keep secrets of my own that I believed to be great ideas, but it turns out when you share your ideas you get more insight and opinions regarding the subject. People will be delightfully surprised to find out how much their colleges actually know. Having a truthful and open full relationship with your workers helps establish a comfort zone in the workplace that ultimately leads to better work ethics and happier employees. 

Another common mistake mentioned was the under capitalization of a business during startup. In order to make sure the business runs smoothly in its opening months, capital will be needed in order to keep the company above water. Very rarely do new businesses generate a profit when they first open, in fact most report losses their first quarter, so to have proper capitalization upon opening is essential to survive your first year of business. If personal funding is not enough than money will be sough after from investors. 

The right investor can help make or break your business so it is very important to be honest and represent the business as accurately as possible. Investors rely heavily on the financial of the business plan and are expecting to make a return on their investment. Having proper quarterly income statements can help paint a better picture for the investors, and when they might expect to see some money in return. As long as your numbers are accurate and honest investors can determine if it is worth their time and money to help you open and operate a business. 

Business Plan Tips

Creating a proper business plan, which can be used for guidance, can be the difference between succeeding and failing in the industry. After watching several videos by John Powers, attorney at law, and Dan Nathanson, School of business UCLA, there are several important factors that they mention when creating a business plan.

 First mentioned by John Powers the inadequate capitalization to start a business is usually the most uncalculated part of the business plan. It is crucial to be very accurate and precise to not overlook anything when putting the numbers together on the plan. The most common mistake is to underestimate the cost of operation for the sake of spending less, and making the plan look better financially. This may look good on paper but in realty drives the business into the ground. Since the business plan can be a guide for time to come, starting up your business with wrong numbers is like talking a boat into the ocean with holes in it. The business is bound to sink before it has ever opened.

Dan Nathanson mentions another common mistake made when creating a business plan is to keep to much secrecy. Entrepreneurs think they all have the billion-dollar idea and do not want to share the full extent of their idea. When creating a plan that involve many people, it is crucial to be honest so no detail is overlooked. Keeping important information to secret means it is overlooked in the books and not accounted for in the financials. If the entrepreneur shared the idea, they could not only get the correct financial for it, but get feedback as well. Individuals in the field that have experience can help with the idea and may see areas that have been overlooked before. It’s the small secrets of a corporation that can ultimately lead to the failure of a big business.

Subscribe to our mailing list

* indicates required

Email Address *

Interested In

• Recording
• Mixing
• Mastering

Cascade M39 Review

Cascade is a fairly new microphone company that is making some buzz around the recording industry.  With their high fashion designs, their microphones are definitely an eye catcher, leaving an impression of elegance. Having such classy looking microphones, at such a low costs, leaves one to wonder if they have sacrificed sound for show. I got my hands on a pair of M39s and was excited to try them out. 

Knowing that it is a shotgun style, large diameter, condenser microphone, it was meant to capture more in the high frequency range. The M39 comes with a 10db switchable pad and a -10 db attenuating low pass filter. It has standard unidirectional cardioid pickup pattern and requires 48v phantom power. Out of the box the M39s where ready for some symbol and overhead recordings. 

Our first pass we used a stereo set of M39s in a spaced pair capture technique, putting the microphone the same distance apart from the center of the snare. We recorded a full set of SabianAAX symbols and high hat to see how the M39s sound. Surprisingly for a set of fairly low priced microphone, cascade has preserved the classic large diaphragm sound with great clarity. The symbols sounded large and open, and the highs were crisp with minimal distortion. The high hat sounded a little too pingy and missed the 10k response that high hats need. Overall it sounded great and defiantly had me impressed. 

After recording several runs, the Cascade M39s performed amazing with great natural sound. Cascade has created a great product that can compare to the Shure SM81 and the AKG C430 with half the cost. A stereo set of the M39s cost $159.00 and can be purchased directly from cascades website. This is a great microphone and I would recommend it to anyone on a budget looking to capture some great overhead sound. I can't wait to test some more of the cascade lineup!

Choosing The Correct Tom Mic

When it comes to capturing the best sounds out of your tom drums the microphone options are endless. There are a few that are preferred and stand out from the pack, so I went ahead and compared their strengths and weaknesses. The models tested were the Sennheiser 421, Sennheiser e904, Shure Beta 56A and the Audix D2.

The first mics tested were the Sennheisers 421 and the e904. The 421 is the industry standard that has been used to mic toms for over 35 years. The tone was precise and the low end was full and warm. It lacked mid range pop but is overall a great sounding microphone. The e904 was not far off with similar fidelity in the high end and great response in the lower frequencies. The e904 performed greater under higher SPL delivering more precise sound.


One of the more affordable tom mics the Shure beta 56A is a standard in any small recording studio. The microphone has a nice warm sound with a good punch in the mid range. It lacks the low end that one looks for when capturing larger floor toms but makes up for it on the smaller toms with its high punch sound. The last mic tested was the Audix D2. The D2 instantly had a noticeable higher noise floor compared to the rest of the microphones. The low end was real large and thumpy with not to much accuracy. The mids were nice and warm but the high end lacked fidelity and clarity.

 Overall every microphone has its own personality and unique sound that can be used in different circumstances. If looking for the most precise clean sound I would pick the e904 or the 421. For dirty more grungy sound the beta 56A would suffice, and for muddy low end rumble the Audix D2 is a winner If you’re looking for the best sound and don’t want to sacrifice, I would recommend using either of the Sennheiser microphones.